The Daily Skein

All the craft that’s fit to make.

Self-Striping Yarn Dyeing December 1, 2008

Filed under: knitting tutorials,Tutorials — Cailyn @ 11:26 pm
Tags: , , , , ,

I’m fascinated by self-striping yarns, but I don’t like knitting straight stockinette stitch much.  I also rarely find a self-striping yarn that I like on the market.  I keep trying to get ahold of some Twisted Fiber yarn, specifically Angst in Kabaam, but I never get there before they sell out.  I just realized the other day that maybe I should sign up for their newsletter to avoid this problem in the future.  Anyway, I have no self-striping yarn or inclination to use it.

 

Except that I am going to be traveling and there’s something very handy about having a simple sock on the needles to keep the hands busy while chatting with people or just for therapy.  Of course, I’ll be bringing other projects because there’s no way I’m working on a “simple sock” on the 5-hour plane ride!  But I’ll need a project to work on during coffee trips with my dad and after dinner chats with my mom and maybe to work on while hanging out late at night with my sisters (bad lighting + after midnight = bad for charts).

 

I’m going to dye my own self-striping yarn.  And I’m going to show you how to do it too!

 

If you’ve never dyed your own yarn before, you’re missing out.  It’s not something I want to do all the time, but it’s fun occasionally and especially with some friends.   I like to use food coloring dying methods instead of chemical dyes because, well, it’s so much easier to clean up!  And cheap and easy to find the supplies.  I suggest reading up on the basic technique in these Knitty articles: Kool Aid Dyeing; Food Color Dyeing.  Kady and I have dyed together two different times.  The first time we both did the cold pour method.  The second time I did the hot pour and Kady stuck with the cold pour.  I dyed some Cascade Superwash with the dip-dye method by myself. All had pretty good results!  There’s a lot of set up to dye self-striping yarn, but the results are worth it.

 

Self-Striping Yarn Tutorial

Materials

  • Enough wool yarn to make your desired project, in this case 420 yards undyed superwash wool
  • Needles for project, in this case Size 1 (2.25mm) DPNs
  • Yardstick/ruler/tape measure
  • Space to wind a long skein of yarn
  • Light colored, smooth waste yarn to tie skein
  • Food coloring/Kool-Aid/chemical dyes
  • Vinegar
  • Pots, measuring spoons, stove

 

Swatch 1

First, as with any knitting, we have to swatch.  Pick your yarn, in this case Knit Picks Undyed Essential, and your needles, in this case Size 1 (2.25mm) and knit a swatch.  If you’ve knit a plain sock with this yarn/needles before, you can skip this swatch.  Figure out your stitches per inch (and rows, if you want).  Multiply your sts/inch by the circumference of your ankle or middle of your foot.  For me, that’s 8 x 9″ = 72 sts.  Socks have negative ease so that they cling, so take that number and multiply it by 0.9.  (That’s an easy way to subtract 10%.)  For me, that’s 72 x 0.9 = 64.8.  I’ll round that down to 64 stitches.

Swatch 2

Cast the number of stitches from the end of Swatch 1 (for me, that’s 64 sts).  Join in the round.  Knit 1 round.  Using a permanent marker, mark the first stitch of the second row.  (You can see I’m swatching with Essential Tuscany, instead of the Undyed. Same yarn, just a different color.)  Then knit 2-8 rounds.  I knit 8 rounds, I’m not really sure why.  At the end of the last round, mark the last stitch.  I marked the yarn close to the last stitch instead.  (Advice: be careful not to get Sharpie on your needles.  Let the marked yarn dry about 10 seconds before knitting with it, it’ll bleed Sharpie on the needles.)

100_3968   100_3973

 

Unravel and Measure

Unravel Swatch 2.  Find the two marks and line them up.  Trim off the cast on/round 1 yarn if you want.  Fold the yarn between the marks into as many rounds as you knit.  I knit 8 rounds, so I folded the yarn between the marks into eighths.  If you only knit 2 rounds, just line up the marks.  If you knit 4 rounds, fold the yarn in half once to make fourths.

100_3974   100_3976

 100_3977

Lay the yarn against a yard stick or ruler and measure.  Don’t worry if the yarn isn’t completely straight.  This project involves a lot of math but isn’t an exact science.  This tells you how many inches it takes to knit one round of your sock.  It takes me about 24″ of yarn to knit one round of my 64 stitch sock.

100_3981

 

Figuring Out the Stripes

I’ll leave it up to you to figure out what colors you’d like to use and how many and thick you’d like your stripes.  I’m going to use a dusky green and deep violet (hopefully) as well as leaving some of the yarn undyed/cream.  I have decided to have 3 rounds of green, then 3 rounds of cream, then 2 rounds of violet, then 2 rounds of cream again.  That means I need 72″ of green, 72″ of cream, 48″ of violet, and 48″ of cream in each stripe repeat. (3 rounds x 24″ per round = 72″; 2 rounds x 24″ per round = 48″)

yarn chart

Adding those lengths up, I’m going to need to make my skein 240″ around. 

 

Re-skeining the Yarn

I took the skein from Knit Picks and balled it up on my swift. Ask me about the time that I tried to re-skein directly from the Knit Picks skein.  Go ahead, ask me about the 4 hours I spent untangling the yarn.  I dare you.

 

Measure out a track using whatever’s at hand that measures the desired length of the skein, in this case 240″.  I used two chairs, 19″ wide, and placed them a little under 8.5 ft apart, making a 240″ circle.  (240″ – 19″ – 19″ = 202″; 202″/2 = 101″; 101″/12″ = 8.4 ft)  Remember that the yarn is going in a circle when planning the track.  (I don’t know why the pictures all turned out so blurry… next time I do this, I’ll take better pictures!)

 100_3982    100_3984

Using the light colored scrap yarn (dark colors will bleed; I used some left over Mist Palette) tie the skein in as many places as needed.  Wrap the ties loosely when tying; if you tie them too tightly, the dye won’t absorb the same as in other spots.  I’m paranoid about my yarn getting tangled, so I tied the yarn in 8 places.  I didn’t think about taking pictures though; the light gray yarn doesn’t show up in the pictures very well!

Using a different color yarn and the same technique, mark the color segments on your skein.  I was stupid and used the Mist for the whole thing.  I got very confused later on.  Trust me, use a different color yarn for each color segment!  This is how I marked my skein, measuring along the yarn and tying markers as needed.  Tie your color markers loosely, but not so loosely that they’ll slide around.  I might have tied my markers a little too loose.  Oh well.

Yarn Diagram    100_3986

 

Soak the Yarn

Soak the yarn in a cold water bath with a 1/4 c (60 ml) of vinegar for a few hours or overnight. (Remove from your skein track, obviously.)  I don’t know if this is completely required, but I do it every time anyway.

 

Ready the Dyes

Mix the dyes as needed; I refer to this article in Knitty when mixing up my dyes.  I used Wilton’s Juniper Green and Violet for this skein.  I dissolved the dyes (quite a bit of dye… more than I needed, I think) in big pots of water and brought to a simmer.

 

Dyeing (Finally!)

Drain the yarn and squeeze lightly to get rid of the excess water.  Find your color segment markers and put the yarn in the right pots based on that.  You can see my undyed/cream sections are carefully held up and out of the way by the strategically placed pot handles.  If you had more colors, obviously the yarn would be in more pots or jars, etc.

100_3990    100_3991

 

Let the yarn soak until the color is just right.  I think I left the green in a little too long, but I’m really happy with the purple.

 

Carefully remove the yarn (it’s hot!! Use tongs!) and rinse in cold water.  The purple didn’t bleed at all, but the green did quite a bit (probably because I put too much dye into the pot) so keep the color segments separate until the rinsing is complete!

 

Squeeze the yarn gently to remove the excess water.  You can hang the skein up somewhere to dry, or you can use my favorite cheat.  If your dryer has a shoe/sweater rack, stick the yarn on that and set on med/low heat!  Only takes about an hour instead of the hours it could take yarn to dry.  And it’s safe from children and pets, which is a nice plus.

100_3993

Re-skeining Part 2

Put your dry yarn back on the skeining track from earlier (or anything similar that will keep the skein from tangling.)  Remove all the ties and re-skein the yarn into something that will fit on your swift (I don’t have a niddy-noddy, so I used a piece of cardboard) or wind into a ball directly.  Admire the pretty new yarn!

100_3996    100_4060

Oh yeah, I saved some of the undyed yarn and made a little mini-skein to dye at the same time for coordinating cuffs/heels/toes.

 

000_0024    000_0023

Check it out, stripes!! (As you can tell by the lack of ribbing, this is just a test swatch, not the actual sock.)  Tip: Start your project at the beginning of a color segment (this swatch starts halfway between cream and green) so that the stripes line up correctly.  I’m so excited to knit these socks!

 

5 Responses to “Self-Striping Yarn Dyeing”

  1. Elizabeth Says:

    That turned out soooo well! Thanks for sharing!

  2. […] Stripes December 5, 2008 Filed under: Knitting Projects — dailyskein @ 5:45 pm Tags: knitting, sock, wool Well, I didn’t get through all the knitting I took with me on my trip.  But I did get quite a bit done, including one complete self-striping sock! […]

  3. […] Selfstriping Yarn (1)(2) […]

  4. […] lemon and lime socks are my self-striping hand dyed! It was so fun to dye them, I used this tutorial, which was really helpful. Basically in order to dye the stripes, you knit a few rounds of […]

  5. […] lemon and lime socks are my self-striping hand dyed! It was so fun to dye them, I used this tutorial, which was really helpful. Basically in order to dye the stripes, you knit a few rounds of […]


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s